Whirlpool RB260PXK - Manual (Page 4)

Using yottr oven
Automatic MEALTIMER'Clock Stop Time Knob Manual Oven Light Switch
Adjustable Oven
Temperature Control
Minute Timer Clean Light
Oven Signal Light Lock Light
SETTING THE CONTROLS
BAKING
1. Put oven racks w/here you want them,
(See page 5 for suggestions.)
2. Set Oven Selector to BAKE,
3. Set Oven Temperature Control to the bak-
ihg temperature you waht.
4. Let the oven preheat until the Signal Light
goes off.
5. Put food in the oven.
6 .
When done baking, turn both knobs to
OFF.
During baking, the elenrents will turn on
and off to help hold the oven temperature at
the setting. (The top element will never turn
red, but will be hot.) The Signal Light will turn
on and off with the elements.
RESETTING THE OVEN TEMPERATURE CONTROL
Does your new oven seem to be hotter or colder at the same settings than your
old oven? The temperature setting in your old oven may have changed gradu­
ally over the years. The accurate setting of your new oven can seem different
If you think the oven temperature needs adjusting, follow these steps:
Locking Screw
OFF
1. Pull out the center
of the Oven Tem­
perature Control.
2. Loosen the lock­
ing screw.
OFF
3. To lower the tem­
perature, move
black ring so
tooth is cioserto
LO. Each notch
equals about 10 F
(50).
Tighten the locking screw. Replace the knob.
To raise the tem­
perature, move
black ring so
tooth is cioserto
HI. Each notch
equals about 10 F
(5'C).
^Tmk