Setting the controls, After the oven is cool – Whirlpool RB260PXK User Manual

Page 11

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

SETTING THE CONTROLS

1. Set the Oven Selector to

CLEAN.

2. Set the Oven Temperature

Control to CLEAN.

3. Make sure the clock and

start and stop time dials
all have the right time
of day.

Push In the Stop Time Knob

and turn the hand clock
wise about two or three
hours. (Two hours for light
soil; three or more for
heavier soil.)

5. Lift the panel between the

oven door and control
panel.

Move the Lock Lever all

the way to the right. The

Clean Light will come on
only when the lever is
all the way over.

7. The Lock Light comes on

when the oven gets
above normal baking
temperatures The Lock
Lever cant be moved

when the Lock Light is on.

When the Look Light goes
off, turn the Oven Selector
and Oven Temperature
Control to OFF.

Move the Lock Lever
back to the left. Do not

force It. Walt until it will

move easily. This turns oft

the Clean Light.

10. After the oven is cool,

wipe off any residue
or ash with a damp
cloth. If needed, touch
up spots with cleanser or
soapy steel-wool pad

DO NOT TOUCH THE OVEN DURING THE CLEANING CYCLE. IT CAN BURN YOU.