Whirlpool RT18BK - Manual (Page 9)

USING YOUR REFRIGERATOR
Changing the control settings
• Adjust the Refrigerator Control first.
• Wait at least 24 hours between adjustments.
• Then adjust the Freezer Control if needed.
If you need to adjust temperatures in refrigerator
or freezer, use the settings listed in the chart
below as a guide. If you have questions, call our
Consumer Assistance Center number. (See
page 21.)
CONDITION: REASON:
RECOMMENDED
CONTROL SETTINGS:
If Refrigerator Door opened often Refrigerator 6
Section is
TOO WARM Large amount of food added
Room temperature too warm Freezer D
If Freezer Door opened often Refrigerator 4
Section is
TOO WARM
Large amount of food added
Very cold room temperature
(can’t cycle often enough) Freezer A
If Refrigerator Controls not set correctly Refrigerator 2
Section is
TOO COLD for your conditions Freezer A
If ICE isn’t Heavy ice usage Refrigerator 4
MADE FAST
ENOUGH Very cold room temperature
(can’t cycle often enough) Freezer A
If BOTH Door opened often Refrigerator 6
SECTIONS
are TOO WARM Large amount of food added
Very warm or very cold room
temperatures
Freezer C
Adjusting the refrigerator shelves
Shelves can be adjusted to match the way you
use your refrigerator. Glass and wire shelves are
strong enough to hold bottles, milk and other
heavy food items.
To remove shelves:
1. Remove items from shelf.
2. Tilt shelf up at front.
3. Lift back of shelf.
4. Pull shelf straight out.
To replace shelves:
1. Guide the rear shelf hooks into the slots in the
shelf supports on cabinet wall.
2. Tilt shelf up at front until hooks drop into slots.
Lower front of shelf to level position.
Glass shelves are heavy.
Handle them with care.