Whirlpool ED19HK - Manual (Page 6)

Adjusting meat pan temperature...
Use Control to Adjust
Meat Pan Temperatures
Cold air flows against the
meat pan through an opening
between the freezer and the
refrigerator. This helps keep the
meat pan colder than the rest
of the refrigerator.
Set the control to let more or
less cold air through.
Adjusting the shelves...
Shelves can be adjusted to match the way you use
your refrigerator. To remove shelves:
1. Tilt up at front,
2. Lift up at back.
3. Pull shelf straight out.
To replace:
t. Guide the rear hooks into the slots in the shelf
supports.
2. Tilt up front of shelf until hooks drop into slot. Lower
front of shelf to level position.
Removing the crisper, meat pan and covers.
Removing Crisper and Meat Pan:
1. Slide crisper and meat pan straight out to stop.
2. Lift the front.
3. Slide the rest of the way out,
4. Replace in reverse order.
Removing Covers:
• Covers are held in place by two pegs at the back
and two notched tabs in front.
1. Press front tabs out of the way.
2. Lift cover front.
3. Lift back off the pegs.
4. Replace in reverse order.
Snap Back into Place
wm
//k
Push the Tab
to Clear the Cover.