Select a 3. fabric selector – Whirlpool LA98OOXP User Manual

Page 5

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

TOUCH RUN TO RESTART WASHER '

TOUCH HOLD TO STOP WASHER ■

Select a

3. FABRIC selector

other selections. If you want a

cycle other than REG/HEAVY, touch
a different FABRIC selector within 8
seconds after turning on POWER
SWITCH.

For more time. Touch HOLD if

you want more time to decide on
another selection.

• HOLD will stop the washer while

you make another selection. Then
push RUN.

If an Indicator Light does

not glow

after a Selector is

touched:

• The Selector was not touched on

the

lower half. Only touch Selec

tors in lower area beneath light.

• The Selector was not touched

before the 8 second selection

time ran out.

• The option you chose can't be

combined with the FABRiC seiec-

tion. See pages 6 and 7.

Changing a Selection. Before

the washer starts, touch another
selector. This cancels the selection

you don't want.
If the washer has started, move the
POWER SWITCH to OFF.

• Then start back at Step 1 on

page 4.