Starting your washer – Whirlpool LA98OOXP User Manual

Page 4

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Starting your washer

Before starting your washer:

1. Measure and add detergent.

2. Place sorted load in washer.

3. Start washer.

The automatic washer has Solid

State Electronic Controls. Read instruc

tions carefully before setting any
cycles.

Select a

1. LOAD SIZE

Move POWER /

2. SWITCH TO ON.

To change the setting on the

LOAD SIZE SELECTOR, move the tab

to RESET.

• Then move the tab to a setting that

describes the size of the load you
want to wash.

• Set the tab on or between HAND

WASHABLE (a few small items) and
EXTRA LARGE (a full load).

See the “Laundry Guide” for details
on load sizes.

The REG/HEAVY Indicator Light wil

come on. You will have 8 seconds
to touch a different FABRIC selector.
If you do not touch a different
FABRIC selector, the washer will
automatically start in the REG/
HEAVY cycle.

LOAD SIZES AND WATER LEVELS

For best cleaning results, the

load must be able to move freely
in the water. Too big a load or too
little water can cause wear or

tearing of load items.

’Approximate

fill with load.

DO NOT

OVERLOAD WASHER.

EXTRA LARGE (20.5 gals/77.6L)*

MEDIUM (13.9 gals/52.6L)*

HAND WASHABLE (7.8 gals/29.5L)^