beautypg.com

To install turntable and support, Icrowave, Oven – Whirlpool GH7145XF User Manual

Page 13: Features

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

M

icrowave

oven

features

Your microwave oven is designed to make your
cooking experience as enjoyable and productive as

possible. To help get you up and running quickly,

the following is a list of the oven’s basic features;

1. Door Handle.

Pull to open door.

2. Door Safety Lock System.

The oven will not

operate unless the door is securely closed.

3. Window with Metal Shield.

Shield prevents mi­

crowaves from escaping. It is designed as a
screen to allow you to view food as it cooks.

4. Cooking Rack.

Use for extra space when

cooking in more than one container at the same
time. See page 18 for more information.

5. Glass Turntable

(PN 4393751) (not shown). In­

cluded in oven cavity - see below for installation

instructions. This turntable turns food as it cooks

for more even cooking. It must be in the oven
during operation for best cooking results. The
turntable is sunken into the cavity floor to give
you more cooking space and better cooking

results. See pages 9,12, 36, 41, and 43 for more
details.

6. Charcoal and Grease Filters.

Included in oven

cavity. See page 37 for installation instructions
and cleaning information.

7. Cooktop/Countertop Light.

Turn on to light

your cooktop or countertop or turn on as a night
light. See page 19 for more information.

8. Cooking Guide Label.

Use as a quick reference

for Quick Cook, Quick Reheat, Quick Defrost,
and Sensor Cook settings.

9. Exhaust Fan and Cooktop Light Switches.

See page 19 for more information.

10. Control Panel.

Touch the pads on this panel to

perform all functions. See pages 14-17 for more
information.

11. Vent Grille.

12. Oven Cavity Light.

13. Microwave Inlet Cover.

14. Model and Serial Number Plate.

See page 2

for more information.

To install turntable and support:

• Fit the hub (PN 4393754) onto the shaft.

• Place the support

(PN 4393752) on the
cavity bottom.

• Place the turntable

on the hub. Make sure
the raised, curved lines

in the center of the

turntable bottom are

between the three
“spokes” of the hub.

• The rollers (PN 4393753) on the support should fit

inside the ridge on the bottom of the turntable.

• The turntable turns both clockwise and counter­

clockwise. This is normal.

13