Stopping/restarting your washer – Whirlpool 3366860 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
O P E R A T I N G Y O U R W A S H E R
5. Turn the Water Temperature Selector
to the setting that corresponds with
the type of fabric and soils being
washed.
• Select any one of three wash-rinse
temperature combinations: cold-cold,
warm-cold, and hot-cold.
• The top temperature is the wash water
and the bottom temperature is the rinse
water.
• See page 13 for water temperature
guidelines.
6. Push in and turn the Cycle Control
Knob clockwise. Stop when the Indica
tor on the outer ring points to the
number in the wash cycle you want.
• The numbers are minutes of wash time.
• The cycles are described on page 7.
Stopping/restarting your washer
If necessary, you can stop your washer
during a cycle to add more clothes.
• To
stop
the washer at any time, push in
the Cycle Control Knob.
• To
restart
the washer, close the lid (if
necessary) and pull out the Cycle
Control Knob.