Removing the doors, Please read these helpful hints before you start – Whirlpool 3VED23DQDW00 User Manual

Page 28

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Removing the Doors

Magnetic
gasket

Please read these helpful hints before

you start

• Before you start, either unplug the

Cabinet

refrigerator or disconnect the electricity
leading to it at the main power supply

and remove any food from door
shelves.

• When removing hinges, keep doors

closed until ready to lift free from
cabinet.

• To remove doors, start at the top hinge

and work down.

• To replace doors, start at the bottom

hinge and work up.

• Line up doors so they are centered

between the sides of the cabinet and
are parallel with each other.

• If refrigerator light does not go out

when door is closed, the door may be
too low. Use a thicker spacer if

necessary.

• Door seal may be adjusted by removing

the top hinge and adding or removing
shims to the bottom hinge.

• Set the door gap at

17.5

mm (^Vi6 inch).

The diameter of a dime is about right.
See figure.

• The refrigerator must be level and

sitting on a solid floor.

8 mm (5/16")

hex-head

hinge screw

Countersink

handle

screw

Oval sealing

screw

(use on bot

toms of doors)

Handle

screw

Oval sealing

screw (use

on tops of

doors)