Solving common ice maker/dispenser problems, Solving common ice maker/ dispenser problems – Whirlpool 3VED23DQDW00 User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Solving common ice maker/dispenser
problems
PROBLEM
CAUSE
SOLUTIONS
Ice dispenser
• Freezer door open
• Close the freezer door.
won’t work
• Ice bin not properly
installed
• Make sure bin is pushed in all the way.
• Wrong ice in bin
• Use only crescents from ice maker.
Shake the bin occasionally to keep
cubes separated and to increase
storage room.
• Dispenser not used
for extended periods,
causing ice cubes to
melt together
• Dump old ice and make a new supply.
Ice dispenser
• Ice dispenser bar
• Wait about 3 minutes for the dispenser
stops working
held in too long
motor to reset.
• Large amounts of ice should be taken
from the bin,
not through the
dispenser.
Off-taste or
• Ice attracts airborne
• Dump old ice and make a new supply.
odor in ice
odors; old ice
Store excess ice in covered container.
• Water quality
• Water containing minerals (such as
sulfur) may require a filter to remove.
• Foods not properly
wrapped
• Wrap properly. See page 26.
• Ice bin and freezer
• Clean freezer and ice bin. See
may need cleaning
cleaning chart on page 22.
• Plumbing to
• Follow Installation Instructions for
ice maker
proper ice maker water supply hookup.
(See back of refrigerator cabinet.)
• New ice maker
• The first few loads of ice from a new
ice maker may have an off-taste.
Dump ice and make a new supply.
19