Changing the control settings, Adjusting the door bins, To remove door bins – Whirlpool 8ED22PW User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Changing the control settings
If you need to adjust temperatures in refrigerator • Adjust the Refrigerator Control first,
or freezer, use the settings listed in the chart
. Wait at least 24 hours between adjustments,
below as a guide. If you have questions, call our
, adjust the Freezer Control if needed.
Consumer Assistance Center number. (See
page 23.)
CONDITION:
REASON:
RECOMMENDED
CONTROL SETTINGS:
If Refrigerator
Door opened often
Refrigerator
4
Section is
TOO WARM
Large amount of food added
Room temperature too warm
Freezer
A
If Freezer
Door opened often
Refrigerator
3
Section is
TOO WARM
Large amount of food added
Very cold room temperature
(can’t cycle often enough)
Freezer
C
If Refrigerator
Controls not set correctly
Refrigerator
2
Section is
TOO COLD
for your conditions
Freezer
B
If ICE isn’t
Heavy ice usage
Refrigerator
3
MADE FAST
ENOUGH
Very cold room temperature
(can’t cycle often enough)
Freezer
C
If BOTH
Door opened often
Refrigerator
4
SECTIONS
are TOO WARM
Large amount of food added
Very warm or very cold room
temperatures
Freezer
B
Adjusting the door bins
To remove door bins:
1. Lift bin up.
2. Pull bin straight out.
To replace door bins:
1. Slide bin in above desired support button.
2. Push bin down until it stops.
Support button