beautypg.com

Removing the ice maker storage bin – Whirlpool 8ED22PW User Manual

Page 14

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

Removing the ice maker storage bin

Remove, empty and clean the storage bin if:

• the ice dispenser has not, or will not, be used

for a week or more.

• a power failure causes ice in the bin to melt and

freeze together.

• the ice dispenser is not used regularly.

To remove ice bin:

1. Pull the covering panel out from the bottom

and slide it to the rear.

2. Lift the signal arm so it clicks into the OFF (up)

position. Ice can still be dispensed, but no
more can be made.

3. Lift the front of the storage bin and puil it out.
4. Empty the ice bin. Use hot or warm water to

meit the ice if necessary. Never use anything
sharp to break up ice in the bin. This can

damage the bin and dispenser mechanism.

5. Wash with mild detergent. Rinse weil. Do not

use harsh or abrasive cleaners or solvents.

6. When replacing the bin, make sure it is

pushed in all the way. Then push the signal
arm down to the ON position to restart ice
production.

13