Before using your refrigerator, Cleaning it, Plugging it in – Whirlpool 8ED22PW User Manual
Page 6: Installing it properly
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Before Using Your
Refrigerator
In This Section
Page
Page
Cleaning it........................................... ......................5
Installing it properly....................
..........................5
Plugging it in...................................... ......................s
Leveling it.....................................
..........................6
It is important to prepare your refrigerator for use. This section will tell you how to clean it, connect it to
a power source, install it and level it.
Cleaning it
Clean your refrigerator before using it, if neces
sary. See cleaning instructions on page 18.
Plugging it in
Recommended Grounding Method
A 115 Volt, 60 Hz., AC only 15 or 20 ampere
fused and properly grounded electrical supply is
required. It is recommended that a separate
circuit serving only this appliance be provided.
Use a receptacle which cannot be turned off with
a switch or pull chain. Do not use an extension
cord.
See Electrical Requirements and Grounding
Instructions Sheet in your Literature Package.
3-prong grounding
type wall receptacle
Refrigerator
power cord -
3-prong
grounding plug
Installing it properly
1. Allow V
2
inch (1.25 cm) space on each side
and at the top of the refrigerator for ease of
installation.
2. If a hinged side of the refrigerator is to be
against a wall, you might want to leave extra
space on that side so the door can be opened
wider.
3. The refrigerator can be flush against the wall.
4. Make sure ice maker water supply has been
connected. Refer to Installation Instructions.