Whirlpool 4VED29DQ - Manual (Page 8)

USING YOUR REFRIGERATOR
Changing the control settings
• Adjust the Refrigerator Control first.
• Wait at least 24 hours between adjustments.
• Then adjust the Freezer Control if needed.
If you need to adjust temperatures in
refrigerator or freezer, use the settings listed
in the chart below as a guide.
CONDITION: REASON:
RECOMMENDED
CONTROL SETTINGS:
If Refrigerator Door opened often Refrigerator 4
Section is
TOO WARM Large amount of food added
Room temperature too warm Freezer A
If Freezer Door opened often Refrigerator 3
Section is
TOO WARM
Large amount of food added
Very cold room temperature
(can’t cycle often enough) Freezer C
If Refrigerator Controls not set correctly Refrigerator 2
Section is
TOO COLD
for your conditions Freezer B
If ICE isn’t Heavy ice usage Refrigerator 3
MADE FAST
ENOUGH Very cold room temperature
(can’t cycle often enough) Freezer C
If BOTH Door opened often Refrigerator 4
SECTIONS
are TOO WARM Large amount of food added
Very warm or very cold room
temperatures
Freezer B
Adjusting the refrigerator shelves
Adjust the shelves to match the way you use
your refrigerator. Glass shelves are strong
enough to hold bottles, milk and other heavy
food items.
To remove glass shelves:
1. Remove items from shelf.
2. Slide shelf out with an even, constant
pull.
3. Lift front and slide the rest of the way out.
To move shelf guides to a new position:
1. Lift front of guide. Pull guide fonward off
rear support. Repeat for other guide.
2. To replace guide, push guide onto rear
support. Push front of guide down onto
support.
To replace glass shelves:
1. Guide rear of shelf into shelf guide.
2. Slide shelf into place.
8