If you need fsp* replacement parts – Whirlpool 4VED29DQ User Manual
Page 23
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
IF YOU NEED ASSISTANCE OR SERVICE
PROBLEM
POSSIBLE CAUSE
SOLUTION
The motor
seems to run
too much
The condenser coils are
dirty.
It is hot outside or in the
room.
The door has been opened
frequently.
A large amount of food has
been put in at one time.
Clean the coils (See page 19.)
On hot days, or if the room is too
warm, the motor naturally runs
longer.
Open the door as few times as
possible.
The motor will run longer in order to
cool down the interior when food is
added.
Remember:
Motor running time depends on different
things: number of door openings, amount of
food stored, temperature of the room, setting
of controls, etc.
Your new refrigerator may be larger than
your old one so it has more space to be
cooled. It also has a regular freezer instead
of a frozen food compartment. All this
means better refrigeration and may require
more running time than your old one.
2. If the problem is not due to
one of the items listed in
Step 1 ...
Contact the dealer from whom you pur
chased the unit or an authorized Whirlpool
service company.
3. If you need FSP* replace
ment parts ...
FSP is a protected trademark of Whirlpool
Corporation for quality parts. Look for this
symbol of quality whenever you need a
replacement part for your Whirlpool* appli
ance. FSP replacement parts will fit right
and work right, because they are made to
the same exacting specifications used to
build every new Whirlpool appliance.
To locate FSP replacement parts in your
area, contact the dealer from whom you
purchased the unit or an authorized
Whirlpool service company.
23