Adjusting the oven temperature control – Whirlpool FEP330Y User Manual

Page 13

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

U S I N G Y O U R R A N G E

Adjusting the oven temperature control

Oven temperature controls will gradually
shift after years of use. So, even though
your new oven is properly adjusted to
provide accurate temperatures, it may cook
faster or slower than your old oven.

If, after using the oven for a period of time,

you are not satisfied with the temperature
settings, you can adjust them by following
these steps;

1. Turn the Oven Temperature Control

Knob to the off position. Pull knob
straight off and flip it over.

2. Loosen the locking screws inside the

control knob. Note the position of the

notches.

3. To lower the temperature, hold knob

handle firmly and move the tooth a notch

counterclockwise. Each notch equals
about 10°F (5°C).

4. To raise the temperature, hold knob

handle firmly and move the tooth a notch

clockwise. Each notch equals about

10°F(5°C).

5. Tighten the locking screws and replace

the control knob.

Notches Tooth