Starting your washer, Select water 2. temperatlres, Load sizes and water levels – Whirlpool LA5311XP User Manual
Page 4: Select a 1. load size select water 2. temperatlres
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Starting your washer
Before starting
your washer:
1 Measure and add detergent
2 Place sorted load in washer
3 Start washer
Select a
1. LOAD SIZE
Select WATER
2. TEMPERATLRES
Turn the knob to point at a setting
that describes the size of load you
want to wash
' The water level can be set tor
EX SMALL (a few items), MED or
LARGE (a full load).
NOTE: Use the LARGE water level
for best permanent press results.
• Match the wash water temperature
to the type of fabrics and soils being
washed
• All rinses are cold.
Recommended
wash
temperafures
can be found in your "Laundry Guide"
IMPORTANT: Use warm water
with the PERMT PRESS or
SHORT cycles. For heavily
soiled permanent press or knit
clothes, pre-wash or pre-soak
before washing In warm water.
LOAD SIZES AND WATER LEVELS
For best cleaning results, the
load must be able to move freely
in the water. Too big a load or too
little water can cause wear or
tearing of load Items
I
'Approximate
fill wifh load.
CAUTION:
DO NOT
OVERLOAD WASHER.
LARGE (17.3 gals. 65,5 L)'
MED (13 4 gals 50.8 L)'
EX SMALL (9 5 gals 36 0 L)‘