beautypg.com

Meeting electrical requirements, Observe all governing codes and ordinances, Do not, under any circumstances – Whirlpool AD050 User Manual

Page 6: Remove the power supply cord ground prong

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

BEFORE USING YOUR DEHUMIDIFIER

4. The water pan must be properly

positioned, on the hangers inside the
cabinet, when dehumidifier is operating in
order for the automatic shut-off to operate
correctly.

5. Two rollers let you move the dehumidifier

easily. Remove the water pan, tilt the unit

forward and roll it to another position.

Meeting electrical requirements

OBSERVE ALL GOVERNING CODES AND
ORDINANCES.

Electrical ground is required on this

appliance.

A 115 volt, 60 Hz., AC only, 15 ampere
fused electrical supply is recommended.

(Time delay fuse or circuit breaker is recom­
mended.) It is recommended that a separate

circuit serving only this appliance be pro­
vided. Do not use an extension cord.

DO NOT, UNDER ANY CIRCUMSTANCES,
REMOVE THE POWER SUPPLY CORD

GROUND PRONG.

Recommended grounding
method

For your personal safety, this appliance
must be grounded. This appliance has a

power supply cord with a 3-prong grounding
plug. To minimize possible shock hazard,

the cord must be plugged into a mating

grounding type wall receptacle, grounded in

accordance with the National Electrical

Code (ANSI/NFPA 70, latest edition) and all
local codes and ordinances. If a mating wall
receptacle is not available, it is the responsi­
bility of the customer to have a properly

grounded, 3-prong wall receptacle installed
by a qualified electrician.

3-prong
grounding
plug

3-prong

grounding

type wall

- — receptacle

Power supply cord

Grounding

prong

This manual is related to the following products: