Installing your convection microwave oven, Installation instructions – Whirlpool MCB790XT User Manual

Page 27

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Installation instructions

BEFORE YOU BEGIN, READ THE FOLLOWING INSTRUCTIONS COMPLETELY AND CAREFULLY.

Installing your convection microwave oven

1. Empty the oven and clean inside it with a

soft, damp cloth. Check for damage such as
misaligned door, damage around the door or
dents inside the oven or on the exterior. If there

is any damage, please do not operate the unit
until it has been checked by an authorized

Whirlpool service technician and any repairs
made.

2. Put the oven on a cart, counter, table or shelf
that is strong enough to hold the oven, the food
and the utensils you put in it. (The control
panel side of the unit is the heavy side. Use
care when handling.) The weight of the oven is
approximately 56 lbs. (25.2 kg).

3. Do not block the vent and air intake open
ings on the back and the bottom of the oven.
Blocking vent or air intake openings can cause
poor cooking results.

Make sure the oven legs are in place. Do not

set the oven on anything that will block the air
intake openings.

4. Do not install the oven next to a conven
tional surface unit or in any area where
excessive heat and steam are generated.
This could damage the outside of the cabinet.

continued on next page