Whirlpool LA54OOXP - Manual (Page 4)

Starting your washer
Before starting
your washer;
1 Measure and add detergent
2 Place sorted load in washer
3 Start washer
Select a
1. LOAD SIZE
Select WATER
2. TEMPERATLRES
• Turn the knob to point at a setting
that describes the size ot load you
want to wash
• The wafer level can be set for SMALL
(a few items) or LARGE (a full load).
DO NOT LOAD
ABOVE CLOTHES GUARD
NOTE: Use the LARGE water level
for best permanent press results.
• Match the wash water temperature
to the type of fabrics and soils being
washed.
• All rinses are cold.
Recommended wash temperatures
can be found in your "Laundry Guide”
IMPORTANT: Use warm water
with the PERM’T PRESS or KNITS/
GENTLE cycles. For heavily
soiled permanent press or knit
clothes, pre-wash or pre-soak
before washing in warm water.
LOAD SIZES AND WATER LEVEES
For best cleaning results, the
load must be able to move freely
in the water. Too big a load or too
little water can cause wear or
tearing of load items.
'Approximate
till with load.
DO NOT
OVERLOAD WASHER.
LARGE (17.3 gals./65.5 L)*
SMALL (9.5 gals./36.0 L)*