Whirlpool RS20AK - Manual (Page 9)

USING YOUR REFRIGERATOR
Changing the control settings
• Adjust the Refrigerator Control first.
• Wait at least 24 hours between adjustments.
• Then adjust the Freezer Control if needed. If you need to adjust temperatures in
refrigerator or freezer, use the settings listed
in the chart below as a guide. If you have
questions, call our toll-free number,
1-800-44-ROPER.
CONDITION: REASON:
RECOMMENDED
CONTROL SETTINGS:
Refrigerator • Door opened often Refrigerator 4
section • Large amount of food added Freezer A
too warm
• Room temperature too warm
Freezer • Door opened often Refrigerator 3
section • Large amount of food added
Freezer C
too warm
• Very cold room temperature
(can’t cycle often enough)
Refrigerator • Controls not set correctly Refrigerator 2
section for your conditions Freezer B
too cold
Ice not • Heavy ice usage Refrigerator 3
made fast • Very cold room temperature Freezer C
enough
(can’t cycle often enough)
Both • Door opened often Refrigerator 4
sections • Large amount of food added
Freezer B
too warm
• Very warm or very cold room
temperatures
Remove the door shelf fronts for easier
cleaning.
To remove shelf fronts:
1. Remove all items from the shelf.
2. Pull out on the inside tab at each end of
the shelf front.
3. Pull shelf front straight out.
To replace shelf fronts:
1. Line up each end of the shelf front with
the button on the door liner wall.
2. Push shelf front straight back until it
snaps securely into place.
3. Replace items on the shelf.