Adjusting the oven temperature control – Whirlpool FEP314B User Manual

Page 13

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

USING YOUR RANGE

Adjusting the oven temperature control

Although your new oven is properly ad
justed to provide accurate temperatures, it

may cook faster or slower than your old

oven.

If, after using the oven for a period of

time, you are not satisfied with the baking/

roasting results, you can change the

temperature calibration by following these
steps:

1. Make sure the Oven Temperature

Control Knob is turned to the off position.
Pull knob straight off and flip it over.

2. Loosen the locking screws inside the

control knob. Note the position of the

notches.

3. To lower the temperature, hold knob

handle firmly and move the tooth a notch

counterclockwise. Each notch equals
about 5°F (2.5°C).

4. To raise the temperature, hold knob

handle firmly and move the tooth a notch
clockwise. Each notch equals about 5°F
(2.5°C).

5. Tighten the locking screws and replace

the control knob.

Locking
screws

To raise

Notches