Command pads, Number pads, If you want to remove the tone – Whirlpool SM988PEP User Manual
Page 8: Do this, Touch clock set, This happens, Iiuci, Cush, Programming tone, Setting the elock
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
C
l
IIUCI]
B|T)[6]0
CUSH]
Command pads
Touch Command Pads to tell the
microwave oven what to do and in
what order to do it. Examples:
- CLOCK SET tells the oven you are
going to set the clock.
- START tells the oven to start.
Each Command Pad (except CLOCK
SET, START and CANCEL) lights an
Indicator Light on the digital display.
The Indicator Light comes on when
you touch the Command Pad.
Number pads
Once you've touched a Command
pad to tell the oven what to do, you’ll
touch Number Pads to tell it...
- a time,
- a Cook Power,
- a food temperature.
Programming tone
Each time you touch a pad you will hear a tone. If you do not hear a tone,
it is because the instruction is not correct, or it is because the tones have been
removed.
EXAMPLE: If you touch a Number Pad before you touch a Command Pad, you
will not hear a tone. The instruction is not correct.
If you want to remove the tone:
• Open the door.
• Touch CANCEL twice, then START
• The tone will not sound for any
touch.
If you want to replace the tone:
• Open the door.
• Touch CANCEL twice, then START.
• The tone will sound for any correct
touch.
Setting the elock
When the oven is first plugged in, the Clock/'Display shows 88
:
88
.
If the electric
power ever goes off, the ClockOisplay will again show all 8's when the power
comes back on.
You can cook or use the Minute Timer without setting the clock, but the display
will be blank after cooking
DO THIS...
1. Touch CLOCK SET.
THIS HAPPENS..
The Display will show a "0" and
the colon will start to flash. (The first
Number Pad must be touched
within 5 seconds or the display will
go blank. Touch CLOCK SET again
and continue.)