Еерееер&ее'’вее, Changing or adding instructions – Whirlpool SM988PEP User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
10.
Touch START.
J
•
D U
_i • i_ I
О
_
C
П
/
и и
и
• Г/ о
/ • i_ _i
О
-
и п
/ I и
с -
и I I и
&еЕРееЕР&еЕ'’веЕ'’
When you touch START, the COOK
CYCLE 1 Indicator Light will stay on
while the oven is cooking in the first
cycle. The COOK POWER Indicator
Light will be on if you are using
a Cook Power other than high. All
other Indicator Lights will go off.
The Display counts down the cook
ing time to show how much time is
left in the first cycle.
For 2 of every 10 seconds, the
Display will show the Cook Power
you selected, if you are using a
Cook Power other than high.
You will hear 2 beeps at the end of
Cook Cycle 1. You can either open
the door to check, stir or turn the food,
etc., or you can let the oven start the
next cycle. If you do open the door,
touch START after closing the door to
restart the oven.
The COOK CYOLE 2 Indicator Light will
be on during the second cycle. The
COOK POWER Indicator Light will also
be on if you are using a Cook Power
other than high.
The Display counts down the time
to show how much time is left in the
second cycle.
For 2 of every 10 seconds, the Dis
play will show the Cook Power you
selected, if you are using a Cook
Power other than high.
When Cook Cycle 2 ends, “End" will
show on the Display and
4
beeps will
sound. (You can stop the beeping by
opening the door or by touching
CANCEL.) "End" will remain on the Dis
play until door is opened or CANCEL
is touched. The Display will then show
the time of day.
Changing or adding instructions
You can change times, Cook Powers, or add cycles any time before touching
START or during oven operation.
- Touch the COOK CYCLE you wish to change or add (COOK CYCLE 1 or 2).
- Touch numbers for new time, if desired.
- Touch COOK POWER, if change is desired.
- Touch number for new Cook Power, or touch COOK POWER again if high is
desired.
- Touch in new cycle and time, if desired.
- Touch START.
17