Whirlpool 3396311 - Manual (Page 7)

O P E R A T I N G Y O U R D R Y E R
Understanding your cycles
See the chart below for descriptions of the
cycles that are on your dryer. See page 9 for
help in selecting the right cycle.
NOTES:
• Use the Energy Preferred Automatic
Setting (•) to dry most loads.
• The last few minutes of all cycles are without
heat to make the load easier to handle.
• To help redi.ce wrinkling, remove the load
from the dryijr as soon as tumbling stops.
This is impoitant for permanent press,
knits, and synthetic fabrics.
• Shaded arec s in the illustrations show
cycle locatio is.
CYCLES
(cycle names may vary with model)
CYCLE CONTROL KNOB
(settincs may vary with model)
Automatic cycle(s)
Use your automatic cycle to dry most
loads.
• Your automatic cycle(s) shuts off when the
selected dryness is reached.
• The Cycle Control Knob will not move until
the load is almost dry and the cool-down
portion of the cycle has been reached. After
the cool-down, the Cycle Control Knob
automatically moves to an OFF area and
tumbling stops.
The Energy Preferred Automatic Setting(*)
correctly dries most loads.
• If the load is drier than you like, select a
setting closer to LESS DRY the next time
you dry a similar load.
• If the load is not as dry as you like, com­
plete drying using a Timed cycle. Select a
setting closer to VERY DRY the next time
you dry a similar load.
NOTE: Some models offer high heat and low
heat automatic cycles. Select the cycle to
match your load.
Energy preferred automatic aetting
Timed cycle(s)
Use your Timed cycle to complete drying if
some items are damp after automatic drying.
Timed drying is also useful to dry delicate
items that require a short drying time.
NOTE: Some models offer high heat and low
heat timed cycles. Select the cycle to match
your load.
continued on next page