Changing the light bulbs, Removing the base grille, Warning – Whirlpool RT22AK User Manual

Page 14

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

U S I N G Y O U R R E F R I G E R A T O R

Changing the light bulbs

^WARNING

Electrical Shock Hazard

Before removing a light bulb, either
unplug the refrigerator or disconnect

the electricity leading to the refrigerator

at the main power supply.

Failure to do so could result in electri

cal shock or personal injury.

To change the refrigerator light:

1. Disconnect refrigerator from power

supply.

2. Reach behind the Control Panel to

remove bulb.

3. Replace with a 60-watt appliance bulb.

Reconnect refrigerator to power supply.

NOTE:

Not all commercial appliance bulbs

will fit your refrigerator. Be sure to replace a
bulb with or>e of the same size and shape.

Removing the base grille

To remove the grille:

1. Open refrigerator door.

2. Pull base grille forward to release the

support tabs from the metal clips.

Do not remove Tech Sheet

fastened

behind the grille.

To replace the grille:

1. Line up grille support tabs with metal

clips.

2. Push firmly to snap into place.

3. Cbse refrigerator door.

See cleaning instructions for defrost pan
and condenser coils on page 17.

Condenser colls

Metal clips

ipan Base

Support tabs grille

1-800-447-6737

WITH QUESTIONS OR COMMENTS