Permanent press cycle, Délicates cycle, Using rinse and spin – Whirlpool RAP5244A User Manual
Page 9: What happens in each cycle
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
O P E R A T I N G Y O U R W A S H E R
Permanent Press cycle
The Permanent Press cycle teatures a cool
down rinse, and low spin speeds to reduce
wriniding.
• Use NORMAL SOIL, 10 minutes of wash
time, to clean moderately soiled permanent
press and some synthetic fabrics.
• Use LIGHT SOIL, 6 minutes of wash time, to
clean lightly soiled permanent press and
some synthetic fabrics.
NOTE:
The washer pauses briefly during the
wash cycle. This is normal for washer
operation.
Délicates cycle
The Délicates cycle features a reduced
agitation speed for gentle soil removal. Low
spin speeds reduce wrinkling.
• Use 8 minutes of wash time to clean lightly to
moderately soiled delicate items and wash
able knits.
Permanent preme cycle
P
DELICATES 4
Délicates cycle
Using rinse and spin
When using extra detergent for heavily soiled
clothes, or washing special-care items, you
may want an extra rinse and spin.
1. Push Cycle Control Knob in and turn
clockwise to one of the dots, as illustrated.
2. Pull Cycle Control Knob out. The washer
will fill to selected load size, agitate, drain,
and spin.
What happens in each cycle
When the Cycle Control Knob is set to a
number and pulled out, the washer fills (with
the selected water temperature) before
agitation and timing start. The washer will
begin agitating immediately after filling;
agitation can occur with the washer lid up or
down. After agitation starts, the knob turns
clockwise until it points to OFF and the cycle
ends.
The washer pauses briefly throughout each
cycle.
These pauses are normal for washer
operation. See chart on page 10.