Using the fabric softener dispenser, Using the chlorine bleach dispenser – Whirlpool RAP5244A User Manual

Page 11

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

O T H E R F E A T U R E S

Using the fabric softener dispenser

1. Add detergent and load the basket.
2. Add liquid fabric softener to the dispenser

using the amount recommended on the
package. Avoid dripping or spilling any
fabric softener on the load.

3. Dilute fabric softener with warm water. Fill

dispenser with warm water until liquid
reaches the opening.

4. Start the washer. Diluted fabric softener will

be added to the load during the final rinse.
NOTE: Do not stop the washer before the
rinse part of the cycle begins. Staining can
occur.

5. Flush dispenser periodically with warm

water. To remove, see “Manual clean lint
filter," page 10.

NOTE: Do not wash clothes with dispenser
removed. Do not add detergent or all-fabric
bleach to dispenser. The dispenser can clog.

Using the chlorine bleach dispenser

Always measure liquid chlorine bleach. Do not
guess. For this washer, never use more than
V

cup (125 mL) for a full load. Use less with

lower water level settings. Follow manu
facturer's directions for safe use. Use a cup
with a pouring spout to avoid spilling.
1. Load the washer.
2. Pour measured chlorine bleach carefully into

dispenser. Do not let bleach splash, drip or
run down into washer basket. Undiluted
bleach will damage any fabric it touches.

3. Start the washer. Bleach will be diluted

automatically during wash part of cycle.

NOTE: Do not add powdered chlorine or all

fabric bleach to the dispenser. The dispenser
can clog.