Hush system – Whirlpool WSR413YW0 User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
>
Hush System
Instructions At A Glance • For detailed instructions see following page.
1. Slide filtration assembly onto mounting screws.
(Step 5a)
cSEc-
m
i
i
Sj
3. Turn on cold water supply and
saddle valve. (Step 5c)
2. Turn on faucet and drain tank to flush
disinfectant from tank. (Step 5b)
4. Allow tank to fill - approximately 4 hours. Lift faucet handle
to drain tank. Fill ana drain tank again - another 4 hours.
Wait for tank to fill again. When faucet is turned on, green
indicator light will indicate water is ready for use. (Steps 5d-5e)
12