Whirlpool 4LEC7646EN0 User Manual

Electric dryer, Have questions about your dryer, Moving dryer to a new location

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Have questions about your dryer?

Check your Use and Care Guide for a toll-free number to call, or call your
dealer. The dealer is listed in the Yellow Pages of your phone directory
under "Appliances — Household — Major — Service and Repair."

When you call, you will need the dryer model number and serial number.

Both numbers are on the model/serial rating plate located in the door well
behind the dryer door and on front of opening.

Record the numbers here for handy reference:

Model No.

Serial No..

Moving dryer to a new location?

Check with a licensed electrician to confirm that supply voltage at new
home matches voltage specified on the model/serial rating plate.

Shut off electrical supply to dryer. Unplug
power supply cord and tape it securely to dryer.
(Or disconnect power supply cable from dryer.)

Electric Dryer

Part No. 3397625

IMPORTANT:
Read and save these instructions.

Installer:

Leave Installation Instructions with homeowner.

Homeowner:

Keep installation Instructions for future reference.

For best performance,

install dryer according to

Installation Instructions. Failure to complete installation
as instructed could void warranty.

Save

Installation Instructions for local electrical inspector's use.

Slide dryer onto cardboard or hardboard

before moving it across the floor to
prevent damaging floor covering.

Home^K Appliances

10/9 (o