Pre-wash cycle, Super wash cycle, Using rinse and spin – Whirlpool 8LSC6244BG0 User Manual
Page 9: Using drain and spin
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

OPERATING YOUR WASHER
Pre-Wash cycle
(on some models)
The Pre-Wash cycle features a brief period
of high speed agitation to help remove heavy
soils and stains that need pretreatment.
• Use warm water for prewashing stained
laundry. (Hot water can set stains.) See
page 18 for stain removal information.
• After the Pre-Wash cycle ends, add
detergent and set a new wash cycle.
Super Wash cycle
(on some models)
Super Wash automatically prewashes the
laundry and advances into the Regular cycle.
(The washer does not need to be reset after
the Super Wash cycle.) Use this cycle when
washing heavily soiled loads that need maxi
mum soil removal.
• For proper cleaning, use double the amount
of detergent recommended for a wash cycle.
NOTE:
The machine pauses during Super
Wash. This is normal for washer operation.
Super Wash cycle
Using rinse and spin
NOTE:
If your washer has the Extra Rinse
option, see page 11.
When using extra detergent for heavily
soiled clothes, or washing special-care
items, you may want an extra rinse and spin.
1. Push in Cycle Control Knob and turn
clockwise to RINSE, as illustrated.
2. Pull out Cycle Control Knob. The washer
fills to selected load size, agitates, drains,
and spins.
Using drain and spin
NOTE:
If your washer has the Extra Rinse
option, move the Extra Rinse Selector to OFF.
A drain and spin may help shorten drying
times for some heavy fabrics or special-care
items by removing excess water.
1. Push in Cycle Control Knob and turn
clockwise to SPIN, as illustrated.
2. Pull out Cycle Control Knob. The washer
drains and spins.