Selecting wash-rinse temperatures – Whirlpool 8LSC6244BG0 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
OPERATING YOUR WASHER
• If your machine has a slide Load Size Selec
tor, you may set the load size anywhere on
or between the Small and Ex Large settings.
To change the load size setting after the
washer has started to fill, move the Selector
to the desired new setting.
NOTE:
If your washer has RESET on the
Load Size Selector, change the load size
selection by first moving the Selector to
RESET, then to the new load size.
Slide Selector with “Reset”
M e d i u m
n a i l
L a r
O
Load Size
Knob Selector with “Reset"
Selecting wash-rinse temperatures
Your washer has a rotary knob, CLEAN
TOUCH* or push button Water Temperature
Selector. Match the water temperature with
the type of fabric and soils being washed.
The top temperature is the wash water and
the bottom temperature is the rinse water.
NOTE:
On CLEAN TOUCH models, an
indicator glows above the water tempera
tures selected.
Knob Selector
Cold
:old
Hoi
:oid
cole
r\
Knob Selector
CLEAN TOUCH*
Push Button Selector