Light wash cycle, Rinse & hold cycle – Whirlpool 8500 User Manual

Page 7

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Light Wash Cycle

A single wash for pre-rinsed or lightly soiled loads.
The Cycle Control Knob stops while the dishwasher

heats water to 140°F (60°C) in the wash and in the
final rinse (markedt). Cycle time* is about 62
minutes plus the time needed to heat water.

Rinse & Hold Cycle

For rinsing a few items to be washed one or more
days later. Cycle time is about 18 minutes. Do not
use detergent.

NOTE: Cycle Control Knob stops while water is heating. See "Water heating" on page 8.

’Cycle time includes heated dry time.