Changing a cycle setting, Changing a drying option – Whirlpool 8500 User Manual

Page 5

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

□

Ain

HEAT

DRY

□□

Changing a cycle setting

You can change a setting anytime during any
cycle.
1. Lift up on the door latch to unlatch the door and

stop the cycle. Do not open the door until the
spray arms stop spinning.

2. Turn the Cycle Control Knob clockwise to the

cycle you want.

3. Be sure the detergent dispensers are filled

properly for the new cycle. When changing the

dial from LIGHT WASH to POTS & PANS, or

NORMAL WASH setting, detergent is released.
Reload covered section of dispenser before
starting Pots & Pans or Normal Wash Cycles.

4. Close and latch the door. The dishwasher will

automatically start the new cycle.

Changing a drying option

If you want to change the selected drying option,
push the other Options button.