Selector switch, Select water, Temperatures – Whirlpool LT5000XL User Manual

Page 6: Starting your washer, Position 1. selector switch, Select water 3. temperatures, Select a 2. load size

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Starting your washer

Before starting your washer, be sure you have measured and added

detergent, and have put in a properly sorted load as recommended in
your "Laundry Guide.”

Position

1. SELECTOR SWITCH

• Moye Selector Switch to WASHER

position. Washer will not operate
when switch is in DRYER position.

Select WATER

3. TEMPERATURES

hot

warm

cold

hot

cold

• Match the wash water temperature

to the type of fabrics and soils being
washed.

Recommended

wash

temperatures

can be found in your "Laundry Guide"

Select a

2. LOAD SIZE

med

small

)

ius

• Turn the knob to point at a setting

that describes the size of load you
want to wash.

• The water level can be set for EX

SMALL, MEDIUM or LARGE loads.
Select the water level that
matches the load size.

See your "Laundry Guide” for details
on load sizes.

LOAD SIZES AND WATER LEVELS

For best cleaning results, the

load must be able to move freely
in the water. Too big a load ortoo
little water can tear items.

45.1 L)-

LARGE

(119 gals

MEDIUM

(9 6 gals. 36 3 L)*

EX-SMALL

(7 3 gals. 27 7 L)'

’Approximate fill with load