Cleaning your air conditioner, Cleaning front panel and air filter, A warning – Whirlpool 1159801 User Manual
Page 5: Starting your air conditioner
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Cleaning Your Air Conditioner
Tabs
Proper use and care of your air conditioner will
help ensure longer life of the unit and lower
operating costs. Follow these instructions
carefully. Call your authorized servicing dealer for
an annual checkup.
Cleaning front panel and air filter
A WARNING
Explosion Hazard
Unplug power cord from outlet before
cleaning air conditioner.
Use only nonflammable cleaners.
Failure to follow these instructions can
result in death, explosion, fire, or electrical
shock.
1. Unplug power cord.
2. Remove the front panel from unit for clean
ing. Press down at top of front panel to
release it from top of cabinet. Watch out for
the sharp metal fins on the front and rear
condenser coils.
3. Pull top of front panel toward you.
4. Lift up and away from bottom spring clips.
5. Remove filter from front panel by removing
elastic band which holds It in place.
6. Clean filter by using a vacuum cleaner or,
if very dirty, wash filter with warm water
and a mild detergent. Air dry thoroughly
before replacing. Do not use a hot air
dryer on filter.
7. Clean front panel using a soft cloth with
warm water and a mild detergent. Rinse
and dry.
8
.
Replace filter and hold it in place with
elastic band.
9. Wipe control panel clean with a soft, dry cloth.
10. Replace front panel. Locate bottom of panel
on the spring clips. Press down on top edge
of front panel and push front toward unit to
secure upper tabs.
11. Reconnect power supply.