Whirlpool 1159801 - Manual (Page 3)

Operating Your Air Conditioner
Starting your air conditioner
^WARNING
Electrical Shock Hazard
Plug into a grounded three-prong outlet.
Do not remove ground prong.
Do not use an adapter.
Failure to follow these instructions can
result in death or electrical shock.
AWARNING
Fire Hazard
Do not use an extension cord.
Doing so can resuit in death, fire, or
eiectricai shock.
EXHAUST
OPEN CLOSED
SYSTEM CONTROL
ONLY
O — HI ■;
< JT >cooL I;
LO
COOL
'^MED I:
COOL
1. Set Exhaust Control to CLOSED for maxi­
mum cooling.
2. Set System Control to the desired setting.
LO COOL ...........................for sleeping comfort
MED COOL............................for normal cooling
HI COOL .......................... for maximum cooling
FAN ONLY ..................... for circulating room air
when no cooling is desired
3. Turn the Thermostat Control to number 6
(mid-setting). You can adjust the air condi­
tioner’s cooling performance by resetting the
Thermostat Control to a higher number for
maximum cooling. Lower the number setting
for less cooling. You will need to experiment to
find the setting which suits you best.
NOTE: If you turn your air conditioner off or if the
compressor turns off when lowering the Thermo­
stat Control, wait at least 3 minutes before turning
it back on or you may blow a fuse or trip a circuit
breaker.