beautypg.com

Adjusting the refrigerator shelves, Removing the meat drawer and cover, Removing the crispers – Whirlpool 8ET18NK User Manual

Page 10

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

Adjusting the refrigerator shelves

Shelves can be adjusted to match the way you
use your refrigerator.

To remove shelves:

1. Remove items from shelf.
2. Tilt shelf up at front.
3. Lift back of shelf.
4. Pull shelf straight out.

To replace shelves:

1. Guide the rear shelf hooks into the slots in the

shelf supports on cabinet wall.

2. Tilt shelf up at front until hooks drop into slots.

Lower front of shelf to level position.

Removing the meat drawer and cover

The meat drawer and cover can be removed for
cleaning or moved to another shelf, if desired.

Remove the meat drawer first.

To remove the meat drawer:

1. Slide the drawer straight out to the stop.

2. Lift the front.
3. Slide drawer out the rest of the way.
4. Replace in reverse order.

To remove the cover:

1. Remove the meat drawer.

2. Tilt front of cover up.
3. Pull cover up and out.

To replace the cover:
1. Fit bottom notches of cover over rear and

center cross bars of shelf.

2. Lower cover into place.
3. Replace the meat drawer.

Lift the front,

then the back.

Pull out to the

stop, lift the
front and pull
again.

Removing the crispers

To remove the crispers:

1. Slide the crisper straight out to the stop.
2. Lift the front.
3. Slide out the rest of fhe way.
4. Replace in reverse order.

Pull out to the stop,

lift the front

and pull again.

This manual is related to the following products: