Operating instructions continued, To exhaust room air, To circulate room air – Whirlpool ACC602XP0 User Manual
Page 4: Cleaning your air conditioner, Electrical shock and fire hazard, Starting your air conditioner, Warning
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Operating Instructions
Continued
The exhaust vent control
The Exhaust Vent Control setting draws stale or
smoky air from the room.
1. To exhaust room air:
Set Exhaust Vent Control to OPEN. Set Selector
to desired setting (COOL, HEAT or FAN ONLY).
Set Fan Control to desired fan speed. Set Thermo
stat Control to desired setting.
2. To circulate room air:
Set Exhaust Vent Control to CLOSED. Set
Selector to desired setting (COOL, HEAT or FAN
ONLY). Set Fan Control to desired fan speed. Set
Thermostat Control to desired setting.
NOTE: For maximum performance, the Exhaust
Vent Control must be in the CLOSED position
when cooling, heating or room air circulation is
desired.
Changing air direction
The air direction cartridges on both sides of the
unit control the direction of the cooled or heated
air. The air direction cartridge may be rotated to
direct the air straight ahead or to the side of the
unit.
The louvers in each air direction cartridge are
operated by a tab. The tab may be used to direct
the air up, down or straight ahead.
Cleaning Your Air Conditioner
Proper use and care of your air conditioner will
help ensure longer life of the unit and lower
operating costs. Follow these instructions
carefully. Call your Whirlpool servicing dealer for
an annual checkup.
A
warning
Electrical Shock and Fire Hazard
• Unplug power cord from receptacle
before cleaning unit. Failure to do so
could result in electricai shock or per
sonal injury.
• Do not use flammable fluids, soivents,
abrasive cleaners, or strong detergents.
Fire or product damage could result.