Operating instructions, Electrical shock hazard, Starting your air conditioner ^warning – Whirlpool ACC602XP0 User Manual
Page 3
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Operating Instructions
CLOSED ^
(®
Starting your air conditioner
^WARNING
Electrical Shock Hazard
• Plug unit only into grounded electrical
outlet.
• Do not use an extension cord.
• Do not operate unit with front removed.
Failure to follow the above precautions
could result in electrical shock or personal
injury.
1. Set the Exhaust Vent Control to CLOSED
for maximum cooling or heating.
SELECTOR
2. Set the Selector to the desired setting.
COOL ...............................for cooling room air
HEAT ................................for heating room air
FAN ONLY .................. for circulating room air
when no cooling or
heating is desired
NOTE: This product is not designed to be
used as a primary heat source. It is intended
for supplemental heating only.
3. Set the Fan Control to the desired setting.
HI................... for maximum cooling or heating
MED .................. for normal cooling or heating
LO.................................................. for sleeping comfort
4. Turn the Thermostat Control to desired
setting. You can adjust the air conditioner’s
cooling or heating performance by resetting
the Thermostat Control toward COLDER for
more cooling. Turn toward WARMER for more
heating. You will need to experiment to find
the setting which suits you best.
NOTE; If you turn your air conditioner off or if the
compressor turns off when lowering the Thermo
stat Control, wait at least three minutes before
turning it back on or you may blow a fuse or trip a
circuit breaker.