Whirlpool 915 - Manual (Page 15)

SETTING THE CONTROLS
CYCLE WASH
A V” shows what each cycle includes
RINSE
MAIN
WASH RINSE
FINAL
RINSE DRY
CYCLE
TIME
(Minutes)
LIGHT
Single wash for
prerinsed or lightly
soiled loads.
• Select Hi-Temp Wash to heat water
in the main wash (marked t).
• The water heats to 140°F in the final
rinse (marked 1^^).
/
/n / 60*
RINSE-WASH LATER
For rinsing a
few items to be
washed 1 or
more days later.
• Do not use detergent.
On 900 Model Series:
• The water heats to 140°F in the
final rinse (marked t)-
• Select the Air Dry Option when
using this cycle.
On 915 Model Series:
• Air Dry is automatically selected.
/ /t 16**
* Cycle time includes dry time and may be longer depending on the temperature ol water entering the dishwasher. The cooler the water, the longer the
cycle time. If the water is already hot enough, the cycle times will be as shown. The cycle control knob does not move while water is being heated.
** Cycle time may be longer on 900 Model Series depending on the temperature of water entering the dishwasher.
Canceling a cycle
You can cancel a cycle at any time.
1. Turn the cycle control knob slowly
clockwise until you hear water draining.
Let the dishwasher drain completely.
2. Open the door.
3. Turn the cycle control knob to Off.
15