CHEVROLET 2010 Equinox - Manual (Page 122)

4-30 Instruments and Controls
To stop the timer, press
V
briefly
while Timer is displayed. To reset
the timer to zero, press and hold
V
.
Digital Speedometer
The speedometer shows how fast
the vehicle is moving in either
kilometers per hour (km/h) or miles
per hour (mph). The speedometer
cannot be reset.
Turn-by-Turn
This display is used for the OnStar
or Navigation System Turn-by-Turn
guidance. See OnStar
® System on
page 4‑44 or the Navigation
manual, if the vehicle has
navigation, for more information.
Blank Display
This display shows no information.
Vehicle Information Menu
Items
Press the MENU button until Vehicle
Information Menu is displayed. Then
press
x
to scroll through the
following menu items:
. Unit
. Tire Pressure
. Remaining Oil Life
. Blank
Unit
Press
V
to enter the unit menu.
Then press
w
or
x
to switch
between US or Metric when the Unit
display is active. Press
V
to confirm
the setting. This will change the
displays on the cluster and DIC to
either metric or English (US)
measurements.
Tire Pressure
The display will show a vehicle with
the approximate pressures of all
four tires. Tire pressure is displayed
in either pounds per square
inch (psi) or in kilopascal (kPa).
Any time the tire pressures are
adjusted the system needs to
relearn the new pressures. To
relearn the tire pressures press
V
while the Tire Pressure display is
active. The display will ask for
confirmation of a relearn. Press
w
or
x
to select Yes or No. Then
press
V
to confirm the selection.
See Tire Pressure Monitor System
on page 9‑51 and Tire Pressure
Monitor Operation on page 9‑53 for
more information.