CHEVROLET 2011 Corvette - Manual (Page 340)

Black plate (50,1) Chevrolet Corvette Owner Manual - 2011
10-50 Vehicle Care
Taillamps, Turn Signal,
and Stoplamps
To replace a stoplamp, taillamp/turn
signal bulb:
1. Remove the screw from the top
of the lamp assembly.
2. Tilt the lamp assembly
toward you.
3. Turn the bulb socket one-quarter
turn counterclockwise and pull
it out.
4. Pull the bulb straight out to
remove it from the socket.
5. Push the new bulb in the bulb
socket until it snaps into place.
6. Reinstall the lamp assembly by
first lining up the tabs on the
bottom of the lamp assembly
with the tabs in the vehicle, then
slide it in.
7. Replace the screw at the top of
the lamp assembly.
Replacement Bulbs
Exterior Lamp Bulb
Number
Front Parking/Turn
Signal
5702KA
Headlamp,
High‐Beam Lamp
H9
Sidemarker Lamp 194LL (W3W)
Stoplamp/Taillamp/
Turn Signal Lamp
3047K
For replacement bulbs not listed
here, contact your dealer.
Electrical System
Electrical System
Overload
The vehicle has fuses and circuit
breakers to protect against an
electrical system overload.
When the current electrical load is
too heavy, the circuit breaker opens
and closes, protecting the circuit
until the current load returns to
normal or the problem is fixed. This
greatly reduces the chance of circuit
overload and fire caused by
electrical problems.