CHEVROLET 2011 Corvette - Manual (Page 190)

Black plate (68,1) Chevrolet Corvette Owner Manual - 2011
5-68 Instruments and Controls
The switch positions on the
hand-held transmitter could be
labeled as follows:
. A switch in the up position
could be labeled as “Up,”
“+,” or “On.”
. A switch in the down
position could be labeled as
“Down,” “−,” or “Off.”
. A switch in the middle
position could be labeled as
“Middle,” “0,” or “Neutral.”
3. Write down the eight to 12 switch
settings from left to right as
follows:
. When a switch is in the up
position, write “Left.”
. When a switch is in the
down position, write “Right.”
. If a switch is set between
the up and down position,
write “Middle.”
The switch settings written
down in Step 3 now
become the button strokes
to be entered into the
Universal Home Remote in
Step 5. Be sure to enter the
switch settings written down
in Step 3, in order from left
to right, into the Universal
Home Remote, when
completing Step 5.
4. From inside the vehicle, first
firmly press all three buttons
at the same time for about
three seconds. Release the
buttons to put the Universal
Home Remote into
programming mode.
A. Left Button (Up, +, or On)
B. Middle Button (Middle, 0,
or Neutral)
C. Right Button (Down, -, or Off)
5. The indicator lights blink slowly.
Enter each switch setting
from Step 3 into the vehicle's
Universal Home Remote. You
have two and one-half minutes to
complete Step 5. Now press one
button on the Universal Home
Remote for each switch setting
as follows: