beautypg.com

6 keys, doors, and windows – CHEVROLET 2012 Corvette User Manual

Page 38

background image

Black plate (6,1)

Chevrolet Corvette Owner Manual - 2012

2-6

Keys, Doors, and Windows

Programming without a
Recognized Transmitter

This procedure requires three
10-minute cycles to complete the
programming process. United
States owners are permitted to
program a new transmitter to
their vehicle when a recognized
transmitter is not available.
The Canadian immobilizer
standard requires that Canadian
owners see their dealer for
programming new transmitters
when two recognized transmitters
are not available.

1. The vehicle must be off.

2. Place the new transmitter in

the glove box transmitter pocket
with the buttons facing the
passenger side.

3. Insert the vehicle key into the

key cylinder located above the
license plate.

4. Open the hatch/trunk.

5. Turn the key five times within

five seconds.

6. The DIC message displays

OFF-ACCESSORY TO
LEARN.

7. Press Acc. on the ignition

switch.

8. The DIC reads WAIT

10 MINUTES and counts
down to zero.

9. The DIC displays

OFF-ACCESSORY TO
LEARN again.

10. Press Acc. on the ignition

switch.

11. Steps 8, 9, and 10 will be

repeated two more times.

12. A beep sounds and the DIC

reads READY FOR FOB #1.
All previously known
transmitter programming has
been erased.