CHEVROLET 2013 Camaro - Manual (Page 124)

Black plate (26,1) Chevrolet Camaro Owner Manual - 2013 - CRC - 4/18/12
5-26 Instruments and Controls
since the last time this menu item
was reset. The fuel economy can be
reset by pressing the SET/CLR
button while the Average Fuel
Economy display is showing.
Average Vehicle Speed
The Average Vehicle Speed display
shows the average speed of the
vehicle in kilometers per hour (km/h)
or miles per hour (mph). This
average is calculated based on the
various vehicle speeds recorded
since the last reset of this value.
The average speed can be reset by
pressing the SET/CLR button while
the Average Vehicle Speed display
is showing.
Turn-by-Turn
This display is used for the OnStar
Turn-by-Turn guidance. See OnStar
Overview on page 14‑1.
Blank Display
This display shows no information.
Vehicle Information Menu
Items
Press the MENU button on the turn
signal lever until Vehicle Information
Menu is displayed. Use the
thumbwheel to scroll through the
following menu items:
. Unit
. Tire Pressure
. Remaining Oil Life
. Coolant Temp
. Battery Voltage
. Speed Warning
Unit
Move the thumbwheel up or down to
switch between US or Metric when
the Unit display is active. Press
SET/CLR to confirm the setting.
This will change the displays on the
cluster and DIC to either English
(US) or metric measurements.
Tire Pressure
The display will show a vehicle with
the approximate pressures of all
four tires. Tire pressure is displayed
in either kilopascal (kPa) or in
pounds per square inch (psi). See
Tire Pressure Monitor System on
page 10‑58 and Tire Pressure
Monitor Operation on page 10‑59.
Remaining Oil Life
This display shows an estimate of
the oil's remaining useful life.
If REMAINING OIL LIFE 99% is
displayed, that means 99% of the
current oil life remains.
When the remaining oil life is low,
the CHANGE ENGINE OIL SOON
message will appear on the display.
See Engine Oil Messages on
page 5‑36. The oil should be
changed as soon as possible. See
Engine Oil on page 10‑12. In
addition to the engine oil life system
monitoring the oil life, additional
maintenance is recommended in the