Champion Power Equipment 14560 - Manual (Page 8)

5
REV 14560-20130415
ENGLISH 14560
Winch
9
14
11
15
6
7
13
8
12
3
4
5
2
1
10
Read this owner’s manual before operating your winch. Familiarize yourself with the location and
function of the controls and features. Save this manual for future reference.
(1) Motor – 1.6 HP 12V DC motor provides
power to the planetary gear mechanism.
(2) Braking System – Braking action is
automatically applied to the winch drum
when the winch motor is stopped and there
is a load on the wire rope.
(3) Winch Drum – The winch drum is the
cylinder on which the wire rope is stored. It
can feed or wind the rope depending on the
remote winch switch.
(4) Planetary Gear System – The reduction
gears convert the winch motor power into
extreme pulling forces. This system allows
high torque while maintaining compact size
and light weight.
(5) Free Spooling Clutch – The clutch allows
the operator to manually disengage “Out”
the spooling drum from the gear train, free
spool. Engaging the clutch “In” locks the
winch into the gear system.
(6) Wire Rope – 15/64” x 38’ galvanized
aircraft cable designed specifically for load
capacity of 4500 lb. (2041 kg)
(7) Clevis Hook – Provides a means for
connecting the looped ends of cables to an
anchor.
(8) Strap – Used to assist cable feed.
(9) Winch Connection Cables – Used to
connect the contactor to the winch motor.
(10) Battery Connection Cables – Used to
connect the battery to the contactor.
(11) Rocker Switch – Rocker switch with
handlebar mount for powering the rope in
or out of your winch drum.
(12) Antenna – Receives wireless signal from
wireless remote control from within a
50 ft. radius.
(13) Solenoid/Contactor – Power from the
vehicle battery flows through the weather
sealed solenoid/contactor switch before
being directed to the winch motor.
(14) Wireless Remote Control – Activate the
wireless system by pressing and holding
the POWER button on the wireless remote
for 3 seconds.
(15) Mount Assembly – Flatbed mounting
channel.
CONTROlS AND FEATURES