Champion Power Equipment 14560 - Manual (Page 16)

13
REV 14560-20130415
ENGLISH 14560
MAINTENANCE
The owner/operator is responsible for all periodic
maintenance. lubrication
All moving parts within the Electric Winch having
been Lubricated using high temperature lithium
grease at the factory. No internal lubrication is
required. Lubricate Cable Assembly periodically
using a light penetrating oil.
Cable Assembly Replacement
It is recommended that any modifications be
performed by a manufacturer’s authorized repair
facility, and that only manufacturer-supplied parts
be used.
1. Move the clutch to the “Out” position.
2. Extend Cable Assembly to its full length.
Note how the existing cable is connected to
the inside of the drum.
3. Remove old Cable Assembly and attach new
one.
4. Retract Cable Assembly onto drum being
careful not to allow kinking.
Complete all scheduled maintenance in a timely
manner. Correct any issue before operating the
winch.
Never operate a damaged or defective winch.
WARNING
Improper maintenance will void your warranty.
WARNING
For service or parts assistance, contact our
help line at
1-877-338-0999
NOTE