Buffalo Filter ViroSafe Fluid Trap - Manual (Page 3)

ViroSafe® Fluid Trap
Directions For Use
Designed for Use with Buffalo Filter
ViroSafe® Filters except VS12D01
and VS12D02
1. Remove the fluid trap from its
packaging.
2. Remove rear cap (side without the
fluid measurements) and place on
appropriate cap holder on top of
fluid trap.
3. Open the 22 mm (7/8 in) port on the
ViroSafe ® filter and insert the fluid
trap, as shown, into the filter. Make
certain the fluid trap is fully seated
into the filter.
PlumeSafe ® Turbo
en
904194 RevA Buffalo Filter ViroSafe Fluid Trap DFU_English-01.indd 3 6/27/2014 9:36:31 AM