Boekel Scientific 270340 Microplate Shaker - Manual (Page 3)

1. Safety
The following symbols mean:-
Caution: Read these operating instructions fully before use and pay particular attention to
sections containing this symbol
Caution: Surfaces can become hot during use.
Always observe the following safety precautions
Use only as specified by the operating instructions, or the intrinsic protection may be impaired.
After transport or storage in humid conditions, dry out the unit before connecting it to the supply voltage.
During drying out the intrinsic protection may be impaired.
Connect only to a power supply with a voltage corresponding to that on the serial number label.
Ensure that the main switch and isolating device (power supply connector) are easily accessible during use.
Connect only to a power supply which provides a safety earth (ground) terminal.
Before moving, disconnect at the power supply socket.
If liquid is spilled inside the unit, disconnect it from the power supply and have it checked by a competent
person.
It is the user's responsibility to carry out appropriate decontamination if hazardous material is spilled on or
inside the equipment.
Do not place a load exceeding 0.7 lb. on the unit.
Place unit on a solid work surface or laboratory bench.
Clean the unit only with a damp cloth, do not use chemical cleaning agents.
N2400301, July 2012, Rev. 2
Page 3
270300 & 270340
Operating Instructions